Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.
Speaking from experience, I can tell you that the best part of any DARPA challenge is when things go horribly wrong. And after you enjoy all the crashes (followed by all of the battery fires), get caught up with the DARPA Lift Challenge with video recaps of the final few days.
This tiny little robot called STEMbot (as in stem, not STEM) can climb up and around plant stems to check for pests. It’s not very fast, but it sure is adorable.
How can a legged robot organize its own walking while maintaining a desired direction? In this work, we present a Differential Adaptive Steering (DAST) mechanism for directional adaptation in legged robots under decentralized adaptive control.
If we as a society would just accept that the appropriate place to store clothing is in a pile on the floor, robots would have a much easier time of it.
Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.
The DARPA Lift Challenge is taking place through this weekend. There are a couple of very brief overview videos from the past couple of days, which are only really interesting because they give you a quick look at some utterly bizarre heavy-lift drone designs. If you like what you see, DARPA has recorded livestreams of the entire event so far. We’ve posted one of those at the end of this section, and if you want to be impressed by some super-weird drones, check out this and this.
When NASA’s SkyFall helicopters take to the Martian skies, one of their tasks will be to hunt for frozen water—a critical resource for future astronauts—using ground-penetrating radar. For that radar to work, the rotorcraft will carry a flexible, fabric-based antenna that extends below the aircraft without interfering with landings or breaking at touchdown.
We’ve improved how GEN-1 learns to adapt to new actuators and new robots at the lowest level, with up to 10-20x gains on internal benchmarks. This significantly boosts performance on high-precision tasks like disassembling parts from a NIST board.
We present SonicFly, a passive aeroacoustic perception framework that enables one unmanned aerial vehicle (UAV) to estimate and follow another using only the leader’s intrinsic flight sound.
Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.
Introducing Gemini Robotics 2—the intelligence layer powering the next generation of truly adaptable robots. As it takes its first literal steps, this major advance unlocks intelligent whole-body control, advanced dexterity, and multirobot collaboration.
Humans routinely communicate through abstractions of their bodies, including shadows, silhouettes, and reflections. Here, we present a robotic system capable of dynamic shadow expression using a 21-degrees-of-freedom dexterous hand with compliant soft skin and a learned shadow self-model.
Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.
In just six months, our team turned GENE.01 into a fully functional humanoid platform that can walk, sense and interact. Its full-body multimodal skin perceives touch, proximity, force, and temperature, bringing Physical AI closer to safe and natural collaboration with people. Not a render. Not a concept. This is GENE.01. The future of Physical AI is taking its first steps.
Why create robot intelligence for just one hand, when we could have it learn from many? GEN-1, our latest embodied foundation model, now supports a broad range of end effectors from 5-finger hands, to specialized tools, and everything in between. Each hand is a different sensorimotor interface by which GEN-1 experiences the physical world. Scaling pretraining across thousands of these interfaces teaches GEN-1 a universal physical common sense that transfers to new hands and new ways to grasp, push, pull, twist, and more.
And to illustrate this concept, a surprise spatula.
This paper presents the design, fabrication, and flight validation of a flat-packable flying wing built primarily from corrugated cardboard. The aircraft is manufactured from three laser-cut sheets and assembled through a fold-and-lock architecture that forms load-bearing wing structures with minimal tooling and no permanent fasteners. The full airframe can be assembled in under 15 minutes, demonstrating strong potential for rapid deployment, low-cost logistics, and scalable field use.
Together with Niantic Spatial and Nvidia, [we] can now scan a real deployment site with off-the-shelf hardware, reconstruct it into a photorealistic Gaussian splat, and run massively parallel RL [reinforcement learning] training. The policies trained in our Gym environment then transfer zero-shot to the real robot and environments they were trained for. This enables faster deployment of more capable and robust policies for the end user.
I think the right thing to do here is only post the disclaimer included with this video: “This film is a conceptual creative production, and certain scenes are presented for demonstration purposes only and do not represent the actual in-store operating process. The final store environment, robot appearance, and functionality are subject to the actual deployment. During actual operations, the robot will autonomously perform only designated preparation steps for specified ice cream products, and its hands will be fitted with protective gloves that comply with applicable food safety requirements.”
Drone delivery is now an essential part of the South West London Pathology (SWLP) modernization agenda. Since February 2026, our highly automated aircraft have been delivering urgent NHS samples across south west London, with service up to 85% faster than ground transport. We are thrilled to be part of this initiative, supporting clinicians in providing timely, effective care for patients and contributing to a greener, more resilient NHS.
Take a closer look at what’s next for the Aurora Driver. Designed to move freight farther, faster, and more efficiently, this next generation of the Aurora Driver delivers greater performance, built to last one million miles and cut hardware cost in half.
How does a robot learn to recognize an object it’s never encountered? In this case, a demo can be worth a thousand words. Short human demonstrations can be used to create fully automated training datasets, sidestepping the prompting limitations that hold back vision-language models. Rather than describing objects with language, the system tracks what a person touches and manipulates during a demo, follows those objects through time, and clusters detections to handle objects merging or splitting apart in the scene. This bypasses a core weakness of VLMs, which struggle to reliably detect unusual or novel objects even with repeated, carefully engineered prompts.
Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.
In this work, we present a systematic evaluation of contemporary humanoid technology for laparoscopic surgical tasks. We develop a humanoid-based laparoscopic teleoperation framework using general-purpose instruments and assess its capabilities through benchtop characterization, dry-lab user studies spanning diverse surgical experience levels, and in vivo porcine studies. Across these evaluations, we quantify technical feasibility, task performance, and clinical readiness relative to established surgical platforms. Together, our study provides an evidence-based assessment of the current capabilities and limitations of humanoids for surgical applications, highlighting both their promise and the key technical challenges that must be addressed before clinical deployment.
Today, we preview ACT-2, the first robotics model to achieve reliability by unifying broad generalization with high performance.
Sunday also has this 3-hour video (!) of Memo folding laundry in “never seen environments.” Let’s just not ask, because we almost certainly don’t want to know.
Spot is not the first quadruped to try its legs at last few meters package delivery, but the challenge is not really those last few meters—it’s going to be not driving the human coworker nuts, is my guess.
Quadrupedal locomotion in complex environments requires multiple motor skills, stable gait transitions, and perceptive control over a broad range of speeds. APT-RL (Action Pretrained Transformer-based Reinforcement Learning) is a unified framework for high-speed, multiskill locomotion. A single policy selects and transitions between gaits and motor skills using only onboard perception and computation. In real-world experiments, KAIST HOUND traversed stairs, hurdles, stepping-stones, gaps, and fallen branches. It reached an instantaneous peak speed of 4.25 meters per second while traversing a 60-centimeter step and 6 m/s during a drop-down transition on a three-step staircase.
Following Atlas’s first-of-its-kind live performance at the FIFA World Cup 2026, we caught up with Seth Davis, senior program manager, to learn how this demonstration came together and what it takes to succeed in the field (and on the pitch).
No teleoperation. No cuts. Long take. One of the world’s few complete demonstrations of long-horizon mobile manipulation, bringing fully autonomous humanoid robots another step closer to us.
We saw some footage of this last week, but here’s a much better video.
Wing-propelled diving birds flap their wings to move through air and water, yet the wing morphology and kinematics that enable this behavior remain poorly understood because of the difficulty of collecting in situ data. The impact of flapping frequency, wing size, and stiffness on locomotion in—and transition between—the two media are still unknown. We compared data from diving birds against experiments using a flapping-wing robot capable of flying, swimming, plunge diving, and exiting the water. We show that frequency adaptation, flexible wings, and powerful actuation enable seamless transitions without folding wings or legs, that large wings enhance flight without substantially reducing underwater efficiency, and that tail-body distance and egress angle affect water exit. These results clarify how birds (and robots) balance multifluid locomotion constraints.
Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.
Getting Digit to step and shuffle around an obstacle on the floor is a real test of reactive footstep planning. Digit has to spot something small and moving, recalculate where to place each foot, and keep working—all without breaking stride or losing balance. That’s the same dynamic footwork Digit uses to navigate clutter and foot traffic on a real warehouse floor.
Wait a sec, Dusty can print things on floors besides construction layouts? How is this not in every city, making sidewalks exciting and fun everywhere?!
I am the first to admit that for US $4,900, the performance of the Unitree R1 is very impressive. But what is it going to do out in the world such that it will give you some sort of return on that investment?
Can we understand whale behavior and language? Harvard SEAS Professor Stephanie Gil explains the possibility of understanding animal language and behavior using AI-driven robots and machine learning. With ongoing whale research and advancements in artificial intelligence, the potential for animal communication with whales could become a tangible reality.
Rodney Brooks, founder and chief technology officer of Robust.AI, sits down with Forbes Assistant Managing Editor Kerry Dolan to discuss how he came up with the idea of the Roomba vacuum cleaner and the future of robotics.
Here are a couple of interesting presentations from UIST 2025, including everyday objects that move around your home with a mind of their own and a project featuring teamwork between helium balloons and ground robots called Buoyancé.
Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.
IROS 2026: 27 September–1 October 2026, PITTSBURGH
Enjoy today’s videos!
Eno is our first agentic robot: an AI agent and a general-purpose robot working as one system. It reasons, plans, and acts in the real world. Human in capability, not in form. Every detail with a purpose, reduced to what matters. Designed not to resemble us, but to extend us. Eno is built end to end at Genesis.
Engineers from NASA’s Jet Propulsion Laboratory are field-testing advanced capabilities for potential future Moon and Mars rovers. In the Colorado Desert near Plaster City, California, teams used a prototype rover called ERNEST (Exploration Rover for Navigating Extreme Sloped Terrain) to test software for a potential future long-range lunar mission. The software enables the rover, developed at JPL, to operate autonomously and travel extreme distances with minimal intervention from human operators.
ERNEST is a lot more capable than it may look; here’s some recent research showing the kinds of terrain it can handle:
Table tennis can produce moments that are difficult even for experienced players to anticipate…like when the ball clips the net and suddenly changes direction. For the Ace research project at Sony AI, these events were a key test of the system’s ability to operate reliably in unpredictable real-world conditions. Ace addresses this uncertainty by simulating counterfactual ball trajectories in real time. In the video, the green overlays show these alternative paths the system considers while planning its response.
And check out some of these rallies that the robot has with Miyuu Khiara.
This video of an ANYmal deployment in a concrete plant is worth watching because it makes explicit how quadrupeds make money in inspection contexts: Among other things, “a cracked crusher foundation [was] caught before a week-long shutdown, avoiding roughly $630,000 in lost production.” That pays for a lot of robots.
A lot of interesting footage here from GITAI’s prep for a robotic satellite servicing demo mission. The thruster test-firing isn’t a robot, exactly, but it may be the coolest part.
Handling delicate, irregular or unpredictable objects is one of the hardest problems left in automation, and one of the most important. It’s what’s holding back the next wave of robots from doing more in the real world. That’s why we’re working with PSYONIC on a new approach. Their Ability Hand, worn by hundreds of people every day, captures real-world data on touch, pressure and grip. Our GoFa cobot brings the industrial-grade accuracy and repeatability to turn that human data into reliable robotic performance.
Sanctuary AI has achieved world-class performance on a complex wire-plugging production task with a global Tier 1 automotive supplier. In this demonstration, Sanctuary AI’s Physical AI successfully performs a high-speed wire-plug insertion task, achieving a validated task success rate of over 99.5% with a cycle time of just 2.54 seconds, meeting live production benchmarks established by the customer.
I cannot overstate how much I do not want any robot to look at what I’m wearing and then attempt to sell me things based on what it thinks it can guess about my personality or interests.
I built GrowBot ( a ~6”, two-servo bipedal robot) that runs entirely on a $15 Raspberry Pi Zero 2 W, ~$100 in parts. An LLM drives it directly: it reads the raw IMU stream with no translation layer and narrates its own motion (“rocked side to side like a baby”), riding on a 50-Hz reinforcement-learning walk policy trained in sim and transferred to the real body.
The idea here is to build an open course around this project, Brit says, “so everyone can experience physical AI right now in a low-risk way.”
Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.
We present MotionDisco, a framework that discovers contact-rich, long-horizon humanoid loco-manipulation motions from scratch, without relying on teleoperation or motion retargeting from human demonstrations.
Some of the discovered behaviors are a little nutso:
It turns out running a workout class is a decent way to stress-test whole-body range of motion. Coordinating fluid movement across every joint at once—timing, velocity, balance compensation—is one of the harder control problems in humanoid robotics.
At AIRoA, we’re bringing robots into real homes. Check out our exclusive first video to see how they work in our development hub and real-life household settings! The project aims to develop home robots that can assist people with everyday tasks and become long-term companions in daily life. In this video, we demonstrate Toyota’s Human Support Robot (HSR) deployed in real homes, where it assists residents with everyday tasks such as tidying rooms and fetching objects.
MIDAS Hand is a fully open-source, tactile-sensor-integrated dexterous robotic hand platform for manipulation, teleoperation, and robot learning research. MIDAS stands for Modular low-Impedance Direct-drive Anthropomorphic Sensing Hand.
This video presents a novel flight maneuver for a flying bipedal robot. During forward flight, the robot performs aerial braking by swinging its legs to adjust the orientation of foot-mounted thrusters.
In this time-lapse, controllers on the ground are repositioning Dextre, our robotic handyman currently installed at the end of the Canadarm2. They used Dextre to unload equipment from the unpressurised Dragon trunk. Such a beautiful choreography to watch with Earth in the background!
This video demonstrates how AI Sapiens learns and performs humanoid motions from video-based motion capture using only a smartphone camera, without professional motion capture equipment. ROBOTIS plans to release an open-source motion generation and learning pipeline for AI Sapiens, enabling users to generate humanoid motions from video and bring them to the real robot.
Tumblenauts are a swarm of minimalist, bacteria-inspired robots designed for collaborative inspection of pressurized microgravity habitats such as the International Space Station. Unlike current intra-vehicular robots that rely on complex actuator-dense mechanisms for precise motion, the Tumblenauts use a stochastic run-and-tumble locomotion and collective cooperation inspired by bacterial colonies.
LUMOS Robotics Founder and CEO Yu Chao officially introduces Project EDGE—inviting global builders, universities, robotics labs, and creative technologists to explore the future of humanoid robotics together. To supercharge the global developer community, we are providing 100 complimentary LUMOS NIX robots to selected global partners.
How do you progress from early childhood computational thinking to advanced high school robotics? Sphero’s product offerings are intentionally scaffolded to scale for students by building critical skills and concepts at every grade level.