Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

RSS 2026: 13–17 July 2026, SYDNEY

Summer School on Multi-Robot Systems: 29 July–4 August 2026, PRAGUE

Actuate 2026: 18–19 August 2026, SAN FRANCISCO

IROS 2026: 27 September–1 October 2026, PITTSBURGH

Enjoy today’s videos!

NASA is considering a mission concept for an advanced, nuclear-powered rover to be deployed to the Moon’s South Pole as part of the agency’s Moon Base plans. The PROMISE (Polar Rover for Observation, Mapping, and In-Situ Exploration) mission concept relies on the Curiosity Mars rover mission’s testbed rover. Some elements of the Perseverance Mars testbed rover shown in this video could be used as well. As exact duplicates of Curiosity and Perseverance, the testbed rovers are equipped with flight-proven engineering systems capable of carrying technology as well as science instruments that would advance Moon Base efforts.

A Mars rover for the Moon? That’s some OPTIMISM right there.

[ JPL ]

This is the absolute best thing since Festo’s AirPenguin.

The project explores soft, lightweight robots that can gently float around people in indoor environments and invite playful, affectionate, and everyday interactions. Unlike conventional drones, our robot is designed to be quiet, soft, touch-safe, and socially approachable. Through this work, we ask what future indoor companion robots might feel like if they were not rigid machines, but gentle floating beings that share space with us.

[ Paper ]

Thanks, Mingyang!

Today, we’re launching our home robot, Isaac 1. Deliveries will begin this fall.

US $500 per month, with some basic task autonomy, plus teleoperation.

[ Weave Robotics ]

A couple of things from this new Figure video: Thing one is that the cart-pulling is a good illustration of how clumsy humanoid robots still are at basic tasks relative to humans. Thing two is that there are absolutely no humans anywhere near these robots. You can see one guy at 0:19, which I can only assume is an accident, because these robots are not safe to be around from an industrial safety perspective.

[ Figure ]

Our very own Kohava Mendelsohn met some robots at ICRA in Vienna, and only one of them was murderous.

[ ICRA 2026 ]

Welcome to Robot Park, where we’re building the future with Apollo 2. Robot Park is where Apollo learns today, getting the experience needed to make a difference tomorrow. Today we’re announcing Robot Park, our nearly 90,000-square-foot facility where Apollo 2 is collecting real-world training data needed to advance autonomous humanoid robots.

[ Apptronik ]

UBTech Robotics, the world’s first publicly traded humanoid robot-maker, has launched a humanlike robot that features lifelike silicone skin and “emotional AI,” as Chinese tech firms increasingly transition robots from the factory floor to the family living room.

[ SCMP ]

Spherephones are redefining how we experience sound. Created at Georgia Tech, this wearable uses spatial audio to alert users to movement from every direction—including behind and below. Built for safer human-robot collaboration, the technology is expanding into gaming and accessibility applications. See how music is becoming a new language for awareness and interaction.

[ Georgia Tech ]

Humanoid robots are meant to carry out long-horizon autonomous missions in a world built for humans. This is hard. These missions consist of many steps, each of which requires them to perceive, navigate, and interact with the environment. This is exactly Flexion’s goal: building the general-purpose intelligence that turns any robot into a useful helper.

[ Flexion ]

We’re introducing KinetIQ Ascend—our reinforcement-learning approach designed to reach 99.9 percent manipulation reliability at human speed and beyond.

[ Humanoid ]

Dr. Sebastian “Basti” Scherer has worked in field robotics since the first DARPA Grand Challenge in 2004. He runs the AirLab at Carnegie Mellon’s Robotics Institute and is the director of safe embodied AI at FieldAI. While much of the industry is focused on local skills like tabletop manipulation, Dr. Scherer sees the greatest value in solving dirty, dull, and dangerous tasks that require operating in uncertain environments where the robot needs to “just work.” When robots “just work,” they become less like robots and more like tools. “That’s the big challenge that we have to overcome,” he says. “And that’s the challenge that FieldAI is really primed to solve.”

[ FieldAI ]

Look, I really appreciate how valuable robots like ElliQ can be, and robots that do good work and offer a financial benefit are incredibly important, especially in the context of family care. But in my opinion, you really shouldn’t suggest that a robot with FaceTime or whatever is an equal replacement for in-person human companionship, nor should you suggest that AI can replace a human wellness coach. If you can’t afford those things, then sure, ElliQ can offer some of those capabilities in a very limited way, but that’s all.

[ ElliQ ]

Very cool moves! Now get a job!

[ DEEP Robotics ]

Drawing inspiration from restaurant waiters in Morocco and Turkey, among other places, we equip a robot with a hanging tray to transport objects from one location to another without dropping them or spilling their contents. We incorporate this approach into an interactive robot waiter demonstration, which uses computer vision and visual servoing to steer toward a person with a raised hand to serve them.

[ Paper ]

If you’re going to make robots wear skirts or shorts or pants, you have to give them butts, or it’s just not going to work. That is all.

[ TechShare ] via [ Kazumichi Moriyama ]

It’s Los Alamos, so of course we have robots. Some work inside gloveboxes, while others probe unexploded ordnance in the field and aid with repetitive lifting, Doc Ock–style. Legend has it there’s a fro-yo robot in the cafeteria.

[ LANL ]

Here are a couple of talks from the recent Humanoids Summit in Japan, from Ali Agha of FieldAI as well as Hiroshi Ishiguro.

[ Humanoids Summit ]

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

RSS 2026: 13–17 July 2026, SYDNEY

Summer School on Multi-Robot Systems: 29 July–4 August 2026, PRAGUE

Actuate 2026: 18–19 August 2026, SAN FRANCISCO

IROS 2026: 27 September–1 October 2026, PITTSBURGH

Enjoy today’s videos!

The best way of introducing a new robot hand is to have a disembodied one crawling across a table.

[ Tangent Robotics ]

MIT CSAIL’s Improbable AI Lab Director Pulkit Agrawal explains his “SoftMimic” approach to making robots safer around humans.

[ SoftMimic ]

I now have absolutely no interest in a humanoid robot for my home unless it can do this.

[ PNDbotics ]

The DARPA Lift Challenge is open to the public August 6-9, 2026, at the National Museum of the US Air Force.

[ DARPA ]

Getting Digit to step and shuffle around an obstacle on the floor is a real test of reactive footstep planning. Digit has to spot something small and moving, recalculate where to place each foot, and keep working—all without breaking stride or losing balance. That’s the same dynamic footwork Digit uses to navigate clutter and foot traffic on a real warehouse floor.

[ Agility Robotics ]

This is the most aggressive firefighting robot I’ve ever seen.

[ DEEP Robotics ]

Wait a sec, Dusty can print things on floors besides construction layouts? How is this not in every city, making sidewalks exciting and fun everywhere?!

[ Dusty ]

I am the first to admit that for US $4,900, the performance of the Unitree R1 is very impressive. But what is it going to do out in the world such that it will give you some sort of return on that investment?

[ Unitree R1 ]

Event cameras are extraordinarily powerful because they can see motion, but what if everything is moving because your camera is moving? Oh no!

[ University of Zurich Robotics & Perception Group ]

Can we understand whale behavior and language? Harvard SEAS Professor Stephanie Gil explains the possibility of understanding animal language and behavior using AI-driven robots and machine learning. With ongoing whale research and advancements in artificial intelligence, the potential for animal communication with whales could become a tangible reality.

[ Harvard SEAS ]

Rodney Brooks, founder and chief technology officer of Robust.AI, sits down with Forbes Assistant Managing Editor Kerry Dolan to discuss how he came up with the idea of the Roomba vacuum cleaner and the future of robotics.

[ LinkedIn ]

Here are a couple of interesting presentations from UIST 2025, including everyday objects that move around your home with a mind of their own and a project featuring teamwork between helium balloons and ground robots called Buoyancé.

[ UIST 2025 ]

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

RSS 2026: 13–17 July 2026, SYDNEY

Summer School on Multi-Robot Systems: 29 July–4 August 2026, PRAGUE

Actuate 2026: 18–19 August 2026, SAN FRANCISCO

IROS 2026: 27 September–1 October 2026, PITTSBURGH

Enjoy today’s videos!

Eno is our first agentic robot: an AI agent and a general-purpose robot working as one system. It reasons, plans, and acts in the real world. Human in capability, not in form. Every detail with a purpose, reduced to what matters. Designed not to resemble us, but to extend us. Eno is built end to end at Genesis.

[ Genesis ]

Engineers from NASA’s Jet Propulsion Laboratory are field-testing advanced capabilities for potential future Moon and Mars rovers. In the Colorado Desert near Plaster City, California, teams used a prototype rover called ERNEST (Exploration Rover for Navigating Extreme Sloped Terrain) to test software for a potential future long-range lunar mission. The software enables the rover, developed at JPL, to operate autonomously and travel extreme distances with minimal intervention from human operators.

ERNEST is a lot more capable than it may look; here’s some recent research showing the kinds of terrain it can handle:

[ NASA's Jet Propulsion Lab ]

Table tennis can produce moments that are difficult even for experienced players to anticipate…like when the ball clips the net and suddenly changes direction. For the Ace research project at Sony AI, these events were a key test of the system’s ability to operate reliably in unpredictable real-world conditions. Ace addresses this uncertainty by simulating counterfactual ball trajectories in real time. In the video, the green overlays show these alternative paths the system considers while planning its response.

And check out some of these rallies that the robot has with Miyuu Khiara.

[ Sony AI ]

This video of an ANYmal deployment in a concrete plant is worth watching because it makes explicit how quadrupeds make money in inspection contexts: Among other things, “a cracked crusher foundation [was] caught before a week-long shutdown, avoiding roughly $630,000 in lost production.” That pays for a lot of robots.

[ ANYbotics ]

A lot of interesting footage here from GITAI’s prep for a robotic satellite servicing demo mission. The thruster test-firing isn’t a robot, exactly, but it may be the coolest part.

[ GITAI ]

Anyone who’s tried to take a half decent photo underwater knows that it’s basically impossible, so let’s try and teach robots to cope.

[ Bi-AQUA ]

Thanks, Masato!

Handling delicate, irregular or unpredictable objects is one of the hardest problems left in automation, and one of the most important. It’s what’s holding back the next wave of robots from doing more in the real world. That’s why we’re working with PSYONIC on a new approach. Their Ability Hand, worn by hundreds of people every day, captures real-world data on touch, pressure and grip. Our GoFa cobot brings the industrial-grade accuracy and repeatability to turn that human data into reliable robotic performance.

[ ABB Robotics ]

Sanctuary AI has achieved world-class performance on a complex wire-plugging production task with a global Tier 1 automotive supplier. In this demonstration, Sanctuary AI’s Physical AI successfully performs a high-speed wire-plug insertion task, achieving a validated task success rate of over 99.5% with a cycle time of just 2.54 seconds, meeting live production benchmarks established by the customer.

WHY IS THIS STRESSING ME OUT SO MUCH?

[ Sanctuary ]

This video is quite obviously fake, but I suppose maybe there’s a market for extra beefy quadrupeds? Maybe?

[ Kepler ]

I cannot overstate how much I do not want any robot to look at what I’m wearing and then attempt to sell me things based on what it thinks it can guess about my personality or interests.

[ MagicLab ]

I am here for fed-up robots learning how to move boxes by just kicking them.

[ ATARI Lab ]

Ah, yes, very useful and very important robots that make me very uncomfortable.

[ Paper ]

I built GrowBot ( a ~6”, two-servo bipedal robot) that runs entirely on a $15 Raspberry Pi Zero 2 W, ~$100 in parts. An LLM drives it directly: it reads the raw IMU stream with no translation layer and narrates its own motion (“rocked side to side like a baby”), riding on a 50-Hz reinforcement-learning walk policy trained in sim and transferred to the real body.

The idea here is to build an open course around this project, Brit says, “so everyone can experience physical AI right now in a low-risk way.”

[ GrowBot ]

Thanks, Brit!

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

RSS 2026: 13–17 July 2026, SYDNEY

Summer School on Multi-Robot Systems: 29 July–4 August 2026, PRAGUE

Actuate 2026: 18–19 August 2026, SAN FRANCISCO

Enjoy today’s videos!

We present MotionDisco, a framework that discovers contact-rich, long-horizon humanoid loco-manipulation motions from scratch, without relying on teleoperation or motion retargeting from human demonstrations.

Some of the discovered behaviors are a little nutso:

[ MotionDisco ]

Not sure I’d say any of this is ‘effortless’ but those claws are pretty cute.

[ Deep Robotics ]

It turns out running a workout class is a decent way to stress-test whole-body range of motion. Coordinating fluid movement across every joint at once—timing, velocity, balance compensation—is one of the harder control problems in humanoid robotics.

[ Agility ]

Our very own Gwendolyn Rak made a robotic shoulder-friend at Computer Human Interaction in Barcelona.

Here’s a bit more about it:

[ MIT ]

At AIRoA, we’re bringing robots into real homes. Check out our exclusive first video to see how they work in our development hub and real-life household settings! The project aims to develop home robots that can assist people with everyday tasks and become long-term companions in daily life. In this video, we demonstrate Toyota’s Human Support Robot (HSR) deployed in real homes, where it assists residents with everyday tasks such as tidying rooms and fetching objects.

[ AI Robot Association ]

Thanks, Naoaki!

MIDAS Hand is a fully open-source, tactile-sensor-integrated dexterous robotic hand platform for manipulation, teleoperation, and robot learning research. MIDAS stands for Modular low-Impedance Direct-drive Anthropomorphic Sensing Hand.

[ MIDAS Hand ]

Thanks, Jun Kim!

This video presents a novel flight maneuver for a flying bipedal robot. During forward flight, the robot performs aerial braking by swinging its legs to adjust the orientation of foot-mounted thrusters.

[ Paper ]

Seems like a really good application for autonomy, to be honest.

[ Built Robotics ]

In this time-lapse, controllers on the ground are repositioning Dextre, our robotic handyman currently installed at the end of the Canadarm2. They used Dextre to unload equipment from the unpressurised Dragon trunk. Such a beautiful choreography to watch with Earth in the background!

[ European Space Agency ]

This video demonstrates how AI Sapiens learns and performs humanoid motions from video-based motion capture using only a smartphone camera, without professional motion capture equipment. ROBOTIS plans to release an open-source motion generation and learning pipeline for AI Sapiens, enabling users to generate humanoid motions from video and bring them to the real robot.

[ ROBOTIS ]

NAO LIVES!

[ Maxtronics ]

Tumblenauts are a swarm of minimalist, bacteria-inspired robots designed for collaborative inspection of pressurized microgravity habitats such as the International Space Station. Unlike current intra-vehicular robots that rely on complex actuator-dense mechanisms for precise motion, the Tumblenauts use a stochastic run-and-tumble locomotion and collective cooperation inspired by bacterial colonies.

[ Self-Organizing Swarms and Robotics Lab ]

LUMOS Robotics Founder and CEO Yu Chao officially introduces Project EDGE—inviting global builders, universities, robotics labs, and creative technologists to explore the future of humanoid robotics together. To supercharge the global developer community, we are providing 100 complimentary LUMOS NIX robots to selected global partners.

[ Lumos Robotics ]

How do you progress from early childhood computational thinking to advanced high school robotics? Sphero’s product offerings are intentionally scaffolded to scale for students by building critical skills and concepts at every grade level.

[ Sphero ]

Thirteen years ago last August, I was camped out in NASA’s Jet Propulsion Laboratory press room in Pasadena, Calif., waiting to see whether the Curiosity rover would survive its descent and skycrane-assisted landing on the surface of Mars. It did, and it was awesome.

Since then, Curiosity (also known as Mars Science Laboratory) has traveled nearly 37 kilometers, drilled into and sampled 42 different rocks, and as of publication has snapped nearly 763,000 photos. The fact that this robot is still hard at work, getting real science done at the age of 13, is absolutely incredible—not only is Mars an actively hostile environment for robots, but the only kind of maintenance that JPL engineers can do is to send very, very careful software updates.

Nevertheless, the clever folks at JPL have managed to keep Curiosity safe, warm, mobile, and sciencing, despite well-worn wheels and less and less power every day. One of those folks is Alexandra Holloway, the assistant team chief for engineering operations for Curiosity, who spoke to IEEE Spectrum about keeping Curiosity roving, what its future looks like, and how JPL has used that experience to make rovers like Perseverance even more capable.

How astonished should we be that after 13 years on Mars, Curiosity is not only still doing science, but actually getting more capable?

Alexandra Holloway is the assistant team chief for engineering operations on the Curiosity Mars rover at the Jet Propulsion Laboratory.Alexandra Holloway

Alexandra Holloway: I’m astonished! The longevity comes from a lot of ongoing work. It’s not just that Curiosity was built robustly; it’s also because we’re continuously putting in effort to ensure it can continue to have that lifespan. I think about all the different kinds of embedded systems there are, from cars to refrigerators, and none of them have the kind of longevity that we have with the rover. It’s mind-boggling, and it’s inspiring.

Is the Perseverance rover, which is nine years younger than Curiosity, significantly different in terms of its hardware and software?

Holloway: In terms of hardware, the rovers are actually very similar. Both use a RAD 750 processor and have the same amount of memory. However, Perseverance has an extra processor specifically for visual odometry, which allows it to drive autonomously. This difference reflects their primary mission designs: Perseverance was designed for driving long distances, while Curiosity is a mission focused on sampling as it goes. So Perseverance’s onboard scheduling capabilities are there to optimize its driving. In fact, just last year, Perseverance surpassed Curiosity’s driving distance after only about three years on Mars.

Curiosity Rover Memory and Software Fixes

Do you have some examples of significant tweaks the team has made to keep Curiosity roving?

Holloway: One of my favorite examples comes from a processor anomaly that happened on Sol 2172 [Ed. note: “Sol” is the term for a Martian day—about 24 hours and 40 minutes]. Curiosity has two computers, A and B. We landed on A, swapped to B due to a NAND memory anomaly early on (Sol 200). For years, we were chugging along on B, until one day there was a problem—B booted up, but it couldn’t mount its drive partition. We’d never seen this before. To preserve B’s data, we swapped back to A, which we hadn’t trusted in two thousand Sols. A also had a degraded memory, with only two gigabytes of usable storage space instead of four. We painstakingly transferred data from B over to A and then down to Earth, and eventually we ran out of stuff we wanted to transfer, which was really good, because A then started acting funny in the same way it did on Sol 200. It was acting like its memory was coming unsoldered. That’s bad.

We quickly swapped back to B, formatted it, and got it working again. The problem then became that we couldn’t trust A’s memory at all, but we needed a second computer as a “lifeboat” for diagnostics and transfers if B failed again. We realized we had one other place of memory: where we keep our flight software. We have four copies of the flight software (two current versions and two older versions) in different banks of very small amounts of memory, just 32 megabytes each. What if we just jettisoned the old flight software copies and used that 64-megabyte NOR memory as our file system for computer A?

So that’s what we did. It was so elegant! Computer A is operating with less than 1 percent of its original memory, but we can run a mission on it. A small mission, but we haven’t had to jettison any core capabilities. We can still drive, we can manage data, we can even theoretically do science. Everything works fine, just much slower and much smaller. That flight software release was even called “R-Hope“ because we hoped it would work.

What are the constraints on Curiosity’s lifespan?

Holloway: Our biggest hardware challenge is wheel wear. It looks like we’re driving on this sandy terrain with some rocks in it, and our intuition said that we could just drive over these rocks and they’d get pushed down into the sand and it would be no big deal. But what we ended up seeing was that those little rocks are actually the tips of giant boulders buried in the sand, and they’re razor sharp. Our wheels were getting ripped apart driving over them, especially our front wheels, so we started driving backwards.

We also monitor consumables. We consider the number of times we move our actuators. That’s a consumable. Curiosity hasn’t taken a selfie in a while, and one of the reasons is that it’s really hard on the joint actuators. Our onboard memory is a consumable, but surprisingly we’re not anywhere near our life cycle for memory. Our biggest consumable is power; we have an RTG, a nuclear power source, which decreases its output as it ages.

Newer missions are flying Snapdragon [processors], but Curiosity’s RAD 750 is a power hog. One of the things that we’ve rolled out that’s going really well is a way of reducing the amount of time we spend with the computer powered on, by harvesting time when we finish activities early and going to sleep, which lets us turn off the computers and some of the heating. Another thing we’re looking at is doing stuff in parallel when we’re on, like being able to drive or use the arm while communicating with an orbiter.

So power is decreasing, and that’s causing us to do all this parallelism work and become more efficient and nuanced in the way we operate. But we are not having any degraded science output at this time. Our wheels are still going, our arm is still okay for now, knock on wood. I would say maybe the bottleneck is budget.

Curiosity Rover’s Impact on Future Mars Exploration

What have you learned from Curiosity that will improve future missions?

Holloway: As an embedded flight software person, I think about how we can change, add, or modify software capabilities during the mission. There’s definitely a sweet spot for loading and patching flight software—some of these concepts were pioneered on Spirit and Opportunity and then inherited by Curiosity and Perseverance, making it easier to understand and change the software.

Some of the things that I wish we had now on [the Mars Science Laboratory] include a better understanding of where our power is going. I want to see how much power each component is drawing every minute, so that we could architect a software system that could balance loads better. We have some of this information that was built in by the engineers who designed the rover, but as an operator, I want something slightly different. So if I were building a mission, I would have those discussions earlier and get operators into the room to say, “what do you want your data products to look like?”

The key takeaway for designing future missions is to talk to all your users early in the design process. It needs to happen upfront.

What does Curiosity’s long-term future look like?

Holloway: That’s a conversation that happens, and it’s a really delicate one. We have a lot of science instruments, and a lot of them have to do with contact science and sampling and rely on the arm. If we lose the arm, what science can we still do? Well, we have a lot of remote sensors too, like cameras, environmental sensors, and radiation sensors. All of these things are important for the future of space exploration and humans on Mars.

From a power perspective, our RTG is projected to start degrading science output in the sixth extended mission, but we’re going to be fine through 2035 and potentially even beyond that. So we have a long and exciting future ahead of us. We need to figure out the best way of operating within our constraints, but we’re still kicking.

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

RSS 2026: 13–17 July 2026, SYDNEY

Summer School on Multi-Robot Systems: 29 July–4 August 2026, PRAGUE

Actuate 2026: 18–19 August 2026, SAN FRANCISCO

Enjoy today’s videos!

It’s been a while since a humanoid robot video actually impressed me, but the beginning of this does.

Hard to know how much of that recovery was luck, though.

[ Deep Robotics ]

When you’re very confident in your MPC-based balance controller...

I feel you, buddy. And thanks for posting this. We’ve all been there, in one way or another.

[ DARoS Lab ]

GENE01 designed from scratch and sent to batch production. Two scalable lower bodies. Physical AI deployed for motor control and world-action modeling. All in three months. Generative Bionics is running.

[ Generative Bionics ]

Alex, the newest humanoid robot built entirely by ‪IHMCRobotics‬, takes its first steps outdoors! This was a significant milestone for our team, especially because Alex is the first humanoid robot developed entirely by IHMC Robotics to venture outside the lab. These outdoor trials were conducted in preparation for a demonstration in Maryland, where Alex later successfully walked completely untethered.

[ IHMC ]

Built on the Enlight platform, Flexiv Mico is a compact dual-arm system engineered for safe, seamless collaboration in any workspace.

[ Flexiv Robotics ]

Is it weird that I’m jealous that robots can have feet that are swappable?

[ Boston Dynamics ]

Midweek at ICRA 2026. Cable-climbing robots that work as a squad: CCRobot-S is a team of robots with reconfigurable cable-driven manipulation that collaboratively inspect and maintain long-span bridge stay cables. Parallel operation for speed, morphological reconfiguration for reach.

[ IEEE Transactions on Robotics ]

I would love to know the story behind this odd choice of hat.

[ Robotis ]

How did Atlas learn football—and why? Go behind the scenes of School of Football and discover a glimpse of the Next of robotics.

What I really want to know is, what kinds of things is it possible to do in football (soccer) when your robot’s joints are not constrained by biology?

[ Boston Dynamics ]

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

ICRA 2026: 1–5 June 2026, VIENNA

RSS 2026: 13–17 July 2026, SYDNEY

Summer School on Multi-Robot Systems: 29 July–4 August 2026, PRAGUE

Actuate 2026: 18–19 August 2026, SAN FRANCISCO

Enjoy today’s videos!

What is the right number of legs for a robot? Two? Four? No, the answer is obviously all of them. All of the legs.

[ Argus ]

Sigh, yet another skill that I as a soccer-playing human should have but a robot has instead: the rabona.

[ Boston Dynamics ]

Robots are rapidly becoming part of our everyday lives, from drones and industrial machines to home assistants and humanoid robots. As their presence continues to grow, an important question arises: How can we choose the right robot—not only in terms of performance and cost but also in terms of sustainability? This video introduces the Eco‑Score for Robots, a new approach to evaluating the environmental impact of robotic systems. Just as eco-labels help consumers make informed choices in other industries, the Robotics Eco‑Label provides a clear and transparent way to assess how sustainable a robot truly is.

[ Robotics EcoLabel ]

Thanks, Bram!

Uh oh, five-fingered hands.

[ Agility ]

Robotic manipulation has come a long way since the 1990s. We’ve gone from the two-ball paddle juggling robot to AthenaZero, who can juggle barehanded using onboard vision feedback. By moving away from task-specific passive end-effectors such as cups or paddles and using multifingered hands, it can transition between a wide range of patterns including cascade, half-shower, tennis, shower, and box.

There needs to be a robot circus show already.

[ Robotics and AI Institute ]

Zero legs. One hat. $13K.

[ Astribot ]

From its elegant design to the advanced technology powering every step, Luna is more than a machine—it’s a leap into the future.

[ LimX Dynamics ]

Thanks, Jinyan!

You got a quadrotor in my quadruped! No, you got a quadruped in my quadrotor!

[ MARS Laboratory ]

A human hand, a robot’s arm—together tracing circles of trust and precision. No missteps. No hesitation. Just pure, algorithmic grace.

[ UBTECH ]

Low-gravity planetary exploration with a quadruped just looks like fun.

[ Autonomous Robots Lab ]

Here it is, that robot Kool-Aid that everyone seems to be drinking. Including me!

[ Generalist ]

Don’t shoot Mini Pupper!

[ MangDang ]

We show here the ARISTO (Anthropomorphic, Robotic, Integrated-Sensing, Tendon-Operated) Hand. Developed in collaboration with Sony Group Corporation, this research platform is engineered to address the complex requirements of manipulating small, thin, and fragile objects.

[ University of Texas Human Centered Robotics Lab ]

Okay, but did you really have to call it the T800?

[ EngineAI ]

Moby shows what useful mobile manipulation looks like in the real world: picking up, carrying, and placing adaptable payloads. The video shows payload handling across increasing crate loads, including a 50.3-pound load, while maintaining balance, control, and mobility. This is the kind of capability that matters outside the lab—moving real objects, in real spaces, with practical reliability.

[ Noble Machines ]

What does it take to make a robot look human? Harvard SEAS students Hailey Block, Henry Tavistock, and Evan Crowley created “Hollow Minds,” a pair of animatronic heads capable of speaking, blinking, tracking movement, and displaying lifelike facial expressions.

[ Harvard University ]

The longevity here is impressive, but the obvious question here is why the heck you’d ever do this task with a bipedal humanoid robot. It also doesn’t seem to have any error recovery, which is obviously fixable, but highlights the fact that real humans are versatile and humanoid robots are not.

[ Figure ]

Kacper Nowicki, CEO and cofounder of Nomagic, recently sat down for a deep dive into the “humanoid vs. purpose-built” debate during a panel discussion at the Web Summit in Vancouver 2026.

[ Nomagic ]

Video Friday is your weekly selection of awesome robotics videos, collected by your friends at IEEE Spectrum robotics. We also post a weekly calendar of upcoming robotics events for the next few months. Please send us your events for inclusion.

ICRA 2026: 1–5 June 2026, VIENNA

RSS 2026: 13–17 July 2026, SYDNEY

Summer School on Multi-Robot Systems: 29 July–4 August 2026, PRAGUE

Actuate 2026: 18–19 August 2026, SAN FRANCISCO

Enjoy today’s videos!

Just months after its debut, Atlas is proving why it is the world’s most capable and dynamic humanoid robot, ready for real work. Lifting a mini-fridge is a feat of strength, but the true breakthrough is in the underlying reinforcement learning and controls systems. The robot is learning to navigate real world adaptability: handling heavy objects by bracing and accounting for the mass and inertia; using whole-body control, not just hands to maneuver; and demonstrating superhuman range of motion and balance. This marks a critical shift in robotics where humanoids move beyond the lab and into dynamic industrial settings.

Watching Atlas move a fridge may be less impressive than whatever the heck it does at 4:10.

[ Boston Dynamics ]

SpikerBot is a robot you teach by wiring neurons, not writing code. Drag spiking neurons in the app, connect them to sensors and motors, then press play. It moves, reacts, and changes behavior based on the brain you built.

Already funded on Kickstarter with a robot kit starting at US $219.

[ Kickstarter ] via [ Backyard Brains ]

Thanks, Greg!

Wheeled-legged robots, which have wheels at their feet and achieve high mobility by coordinating wheel drive and leg drive, have been developed. In this paper, we address the problem of how to draw out the potential task-execution capability of the legs by freeing them from the roles of locomotion through external body support.

[ WiXus ] from [ JSK Robotics Laboratory ] via [ ICRA 2026 ]

A very clever idea for electronics-free, multi-dimensional touch sensing.

[ Nature Communications ]

Using external voice commands, G1 is directly controlled to generate a wide range of actions in real time. This video was recorded in a single take, with on‑site audio recording.

[ Unitree ]

Hummingbirds are impressive flyers, and advancements in high-speed photography, instrumentation, and measurement techniques have revealed much about their aerodynamics, flight behaviors, and wing and body kinematics. However, comparatively less is known about their natural flight dynamics, which is the relationship among a bird’s flight velocities, the control actions of its wings, and the acceleration of the bird in flight. To investigate this, at the Advanced Vertical Flight Laboratory we have designed, built, and flight tested a biomimetic robotic hummingbird on which is implemented the same techniques for flight control as observed in hummingbirds.

[ Advanced Vertical Flight Laboratory ]

I guess if you’re going to make a robot dog, it’s only fair to give it the ability to frolic in the water.

[ MagicLab ]

The original automated layout robot—the one that showed up when the construction industry was pretty sure robots were lame and then proved otherwise. It has printed millions of square feet of layout across thousands of projects. It built an entire category of construction technology. The category of: Stuff That Actually Does Helpful Work on Real Jobsites. But FieldPrinter 2 is here. It’s faster, tougher, smaller, and smarter. So for FieldPrinter 1, it’s time. Time for a quiet retirement. A mug. Maybe a plaque... But nay, good knight! Thou shalt expire in a blaze of thunderous glory!!

[ Dusty Robotics ]

Here’s an interesting idea for an inflatable monocopter drone.

[ AIRLAB ]

Meet the Lynx S10—a compact all-terrain robot built to deliver industry-grade performance in a lightweight form factor under 20kg.

[ DE Robotics ]

Noble Machines builds general-purpose robots for heavy industry, supporting people with the most hazardous and physically demanding tasks. Attendees at NVIDIA GTC 2026 witnessed the power of autonomous industrial work with Noble Machines Moby.

[ Noble Machines ]

I’m sorry, but Lego bricks should be for humans only.

[ LimX Dynamics ]

Need a robot that can go places? Huskies were around way before legged humanoids, and I bet they’ll be around way after, too.

[ Clearpath Robotics ]

I know this little dude is just a research platform at Disney, but I still want one to be my friend.

[ Paper ]

In March 1982, General Motors announced a rapid and aggressive conversion to robotics. By 1990, GM wanted 14,000 robots in their factories doing everything from painting to welding to assembly. Nowadays, we dream of robots in the factories, doing everything end to end. In the dark. Lights out. Guess what? GM dreamed the same 40 years ago, and they spent an estimated US $60 billion to try to make it reality. In today’s video, we look at General Motors and their dreams of the automated, all-robot factory.

[ Asianometry ]